Give Us A Call 561.989.8373
Your shower enclosure takes on heat, humidity, and daily wear year after year. When something breaks, chips, leaks, or just stops working right, CFG Shower Doors & Closets is the team to call. We have been serving Palm Beach and Broward County homeowners since 2005, and we bring that same precision to repair work that we put into every custom installation.
Whether you need a cracked panel replaced, a hinge that no longer holds its tension, or a frameless door that has drifted out of alignment, we handle it all under one roof.
Glass damage does not always mean a full replacement. Many chips, scratches, and edge cracks can be assessed and addressed quickly before they develop into a larger problem. Our technicians inspect the damage, identify whether the glass can be serviced in place or needs to be replaced, and give you a straightforward recommendation.
South Florida’s coastal humidity and hard water conditions can also cause surface clouding and mineral buildup that dulls what used to be crystal-clear glass. We offer professional glass cleaning and restoration services that bring the clarity back without abrasive damage.
Signs your shower glass needs attention:
Tempered safety glass is designed to last, but it is not indestructible. Age, impact, or a hardware failure that puts stress on the panel can result in glass that needs to be replaced rather than repaired. CFG fabricates custom glass in-house, which means replacement panels are cut to the exact dimensions of your existing enclosure. You are not waiting on a generic panel that needs to be shimmed or adjusted.
We work with 3/8″ and 1/2″ tempered glass and can match your existing glass type, finish, and thickness so the replacement looks like the rest of your enclosure.
Glass replacement is often the right call when:
Frameless shower door hardware takes a beating over time. Hinges carry the weight of heavy glass panels every single day. Handles, pull bars, knobs, and towel bars experience constant grip pressure. Over time, pivot tension loosens, glass-to-glass hinges fall out of position, and chrome or brushed nickel finishes begin to corrode from hard water exposure.
CFG stocks and services hardware for a wide range of frameless enclosure configurations. We can tighten, realign, or fully replace:
If your door is dragging, squealing, not latching cleanly, or pulling away from the wall, the problem is almost always a hardware issue that can be resolved in a single service visit.
Frameless enclosures are built without the support of a metal frame, which means the glass itself carries more structural load. Over time, panels can drift out of true from home settling, hinge wear, or the daily stress of open-and-close cycles. When a frameless door falls out of alignment, it puts uneven pressure on the glass and hardware, which accelerates wear and can eventually lead to a more serious problem.
CFG technicians can recalibrate door alignment, adjust hinge tension, and re-seal perimeter joints to bring your enclosure back to where it should be. Proactive maintenance on frameless enclosures extends hardware life, prevents water from escaping the enclosure, and keeps the door operating smoothly.
We recommend a maintenance check when:
Q: Can I keep using my shower if the glass is cracked?
A: It depends on the crack. A small chip at the panel edge may be low-risk in the very short term, but any crack can spread under the thermal stress of daily showers. A crack that runs across the face of the panel or a panel that has shattered should be treated as unsafe. Stop using the enclosure and contact us for an assessment. Tempered glass is designed to resist breakage, but once it is compromised, it cannot be counted on to hold.
Q: How do I know if my shower door needs a new seal or a new panel?
A: If water is leaking around the door and the glass itself is undamaged, the issue is almost always the seal or the bottom sweep rather than the panel. Run your finger along the sweep at the bottom of the door and the perimeter seal where the glass meets the wall. If the material feels stiff, cracked, or is pulling away, a seal replacement will solve the problem. If the glass is cracked, chipped, or structurally compromised, a panel replacement is the right call. When in doubt, a technician can tell you within minutes of looking at it.
Q: How long does a shower glass repair appointment take?
A: Most hardware repairs and seal replacements can be completed in a single visit, typically within one to two hours. A full glass panel replacement requires custom fabrication, so we will measure during an initial visit and return once the panel is cut and ready, usually within a few business days.
Q: My frameless shower door is dragging on the floor. What causes that?
A: Dragging almost always points to a hinge or alignment issue. Over time, hinges lose tension and the door sags slightly, which drops the bottom edge and causes it to drag against the threshold or floor. In some cases, the cause is home settling that has shifted the door frame slightly out of plumb. Either way, this is a mechanical adjustment and does not require new glass. We can inspect and correct it in a single visit.
Q: Can you match replacement glass to my existing shower enclosure?
A: Yes. CFG fabricates custom glass in-house, so replacement panels are cut to the exact dimensions and specifications of your existing enclosure. We match glass thickness, type, and finish so the replacement integrates cleanly with the rest of your shower. We work with 3/8″ and 1/2″ tempered glass across a range of finishes.
Q: My shower door hinge is corroded. Can you replace just the hardware without replacing the glass?
A: In most cases, yes. Hardware replacement is a standalone service. We stock components for a wide range of frameless enclosure configurations, including pivot hinges, glass-to-glass hinges, wall-mount brackets, handles, pull bars, and sweeps. As long as the glass panels themselves are in good shape, new hardware will restore the door to full function without touching the glass.
Q: How often should frameless shower doors be serviced?
A: We recommend checking hinge tension and door alignment every 12 to 18 months, particularly for heavier panels. Seals and sweeps typically need replacement every two to three years depending on water hardness and usage frequency. If you notice any changes in how the door operates, such as increased resistance, a new sound, or water escaping where it did not before, do not wait for the annual check. Address it early and the fix is almost always simpler and less costly.
Q: Do you service shower enclosures you did not originally install?
A: Yes. We handle repair and maintenance on existing enclosures regardless of who installed them. As long as the enclosure is a standard frameless or semi-frameless configuration, we can assess it and provide repair options.
Q: What areas do you serve?
A: CFG Shower Doors & Closets serves all of Palm Beach and Broward County, including Boca Raton, Delray Beach, Boynton Beach, West Palm Beach, Coral Springs, Deerfield Beach, Pompano Beach, Coconut Creek, Parkland, Margate, Lighthouse Point, and surrounding communities.
Q: How do I schedule a repair estimate?
A: Call us at 561.989.8373 or fill out the contact form on our website. We offer free in-home estimates and can typically schedule within a few days of your initial inquiry.
CFG Shower Doors & Closets handles repair and maintenance calls across the full South Florida region we have built over twenty years. We serve Boca Raton, Delray Beach, Boynton Beach, West Palm Beach, Deerfield Beach, Coral Springs, Pompano Beach, Coconut Creek, Parkland, Margate, Lighthouse Point, and surrounding communities. As a family-owned and locally operated business, we show up on time and communicate clearly, from the first call to the final inspection.
Ready to get your shower glass back in shape? Call 561.989.8373 or fill out the form below to schedule a free estimate.